How to Format an SSD: A Comprehensive Guide

Formatting an SSD is the best way to boost its performance or clear out any potentially malicious malware whenever you move it to a new system, purchase one second hand, or plan to sell yours on to someone else. While SSDs do offer incredible performance, that can degrade over time, and the last thing you want is your data ending up in the hands of someone else. Fortunately, cleaning out a drive and returning it to its near-factory-fresh state is pretty straight forward. Although you’ll need to take precautious to , you can get your drive back to fighting fit shape in now time.

How to format a SSD using Disk Management

There are a bunch of third-party tools that can help you format a SSD. However, the built-in Windows Disk Management utility is capable of doing the same. It can also be used to of your SSD. Note, however, that while this is a good way to improve system performance, it does not completely erase old data. So if you are selling your drive on to someone else, you’ll want to perform a more robust format, such as “zero-filling” the drive (see below).

Open the menu, type

Disk Management

, and hit

Enter

to open the Disk Management utility.

From the list of drives, select the SSD that you want to format. Make sure that you select the right SSD, as you will lose all of your data.

Once you have identified your SSD, right-click on it and select

Format

.

A new pop-up should open where you must select the

File system

as

NTFS

, the

Allocation unit size

as

Default

, and uncheck the

Quick Format

box.

If you wish, you can also rename your SSD by typing the name in

Volume label

field.

Click

OK

to begin the format process.

Windows should now format your SSD.

How to format an SSD using File Explorer

Another simple way to format your SSD is by using the default Windows File Explorer. It works pretty much the same way but with fewer steps.

Open the File Explorer and search for your SSD from the list of drives and folders on the left.

Right-click on the SSD and select the

Format

option.

Make sure you have selected the correct SSD as you don’t want to end up losing important files.

A new window should open where you need to select the

File system

as

NTFS

, the

Allocation unit size

as

Default

, and uncheck the

Quick Format

box.

You can also rename your SSD by typing the name in

Volume label

field.

Click on the

Start

button at the bottom to begin the process.

Windows should now format your SSD.

How to format an SSD using the zero-fill method

Where standard formatting merely makes your SSD “forget” where all your files are, leaving them still accessible to someone determined enough to find them, zero-filling your drive erases everything to a much higher standard. It completely wipes your storage device by writing zeroes to every bit, thus making it much harder for any sort of data recovery.

Here’s how you can format an SSD using the zero-fill method.

Open the Windows menu, type

cmd

, and select the option to open

Command Prompt

with administrative rights.

Once Command Prompt opens, type

diskpart

.

Make sure you double-check and pick the correct SSD to format. In our case, we want to format the D: drive, so we need to type

select volume D

.

Next, enter the current volume label or name of the disk drive and hit

Enter

.

A warning message should appear where you need to type

Y

to confirm your action.

Windows should now format your SSD using the zero-fill method. It might take a while depending on the size of the SSD.